No products in the cart.
30 day returns policyDescription
USED TO PRIME PLASTIC AND ALUMINUM BEFORE AN APPLICATION OF MAGICEZY 9 SECOND CHIP FIX OR HAIRLINE FIX.
- Use on plastic and aluminium surfaces.
- Ultra strong adhesion.
- Water clean-up
- Can be used on most plastics.
- Easy to apply. No tools required.
- Money-back satisfaction guarantee.
- Suitable for above the waterline use.
OVERVIEW
Use as part of an easy two-step process to repair scrapes, chips and gouges in plastic and aluminium surfaces. Eg. plastic guards, covers, fairings, aluminium painted boat hulls.
First, prime the surface with a thin layer of Mega Fusion and allow to dry. Then apply a top coat of either 9 Second Chip Fix or Hairline Fix or both (depending on the type of damage or amount of gloss required).
Can also be used as a powerful adhesive. Eg. to bond two pieces of plastic together.
- If using on shiny plastic, rub with an abrasive pad until dull.
- Clean area with soapy water, rinse and allow to completely dry.
- Apply a thin layer of Mega Fusion into the damage.
- Turn the tube around 180 degrees and smooth over the repair with LEVEL.
- Use a tissue to remove any excess Mega Fusion
- If used as a primer, allow 2 hours (at 70°F/ 20°C) before applying a top coat of either 9 Second Chip Fix or Hairline Fix.
- If used to bond, allow 24 hours cure time.
Cure time:
Primed in two hours at at 70°F/ 20°C.
If used to bond, allow 24 hours to harden.
Notes:
- Dries to a matte finish. If a glossy finish is required, apply a top, finishing coat of MagicEzy Hairline Fix or Chip Fix.
- If the temperature is above 70°F / 20°C allow the Mega Fusion 2 hours to dry before applying Hairline or Chip Fix. The 2 hours is essential to allow Mega Fusion’s industrial strength to penetrate into the surface below.
- If the temperature is expected to drop below 20°C / 70°F within the first 24 hours, blow dry the repair with a warm hairdryer for about 2 minutes after each coat.
Additional information
| Weight | 0.1 kg |
|---|
