Discover GURIT AMPRO™ – Your All-Purpose Epoxy Solution!

GURIT AMPRO™ is an award-winning epoxy system renowned for its simplicity and effectiveness. With its 3:1 mix ratio by volume, it’s easy to use and provides consistent results every time. Here’s what makes AMPRO™ stand out:

• Low Temperature Curing: Even at +5°C, AMPRO™ leaves no surface residue, ensuring a clean finish.
• Versatility: Suitable for bonding, laminating, and filling, making it perfect for various applications.
• Multiple Hardeners: Available with Fast (F), and Slow (SL) hardeners to suit your specific needs.

HOW-TO USE IT

MIXING AND HANDLING

Accurate measurement and thorough mixing are essential when using this system, and any deviation from the prescribed mix ratios will seriously degrade the physical properties of the cured system. The resin and hardener must be stirred well for two minutes or more, with particular attention being paid to the sides and bottom of the container. As soon as the material is mixed the reaction begins. This reaction produces heat (exothermic), which will in turn accelerate the reaction. If this mixed material is left in a confined mixing vessel the heat cannot disperse and the reaction will become uncontrollable.

All-purpose epoxy It is a simple to use, which can be used for:

• Coating 
• Filling 
• Bonding and 
• Laminating.

AMPRO™ FILLERS FOR BONDING AND FILLING MIXES

GLASS BUBBLES

WATERPROOF FILLING & BONDING

Glass Bubbles are hollow glass spheres with a more variable particle size than microballoons. Being composed chemically of glass, they are physically harder than microballoons and filled resin mixes are noticeably more difficult to sand.
However, glass bubbles produce a more waterproof filler mix and are often used on belowwaterline applications on boats. Being significantly less expensive than microballoons they
are often preferred if easy sanding performance is not of prime importance. They can be mixed with microballoons in any proportion for colour purposes

• White, hollow glass spheres for waterproof filling and bonding
• Ideal as a finishing filler for hard wearing edges & surfaces
• Refer to the GURIT AMPRO™ datasheet for recommended mixes

INSTRUCTIONS FOR USE

Below are approximate filler loadings for making adhesive and filler mixes together with AMPRO™ multi-purpose systems. For further information please refer to the respective AMPRO™ datasheet.

All filler additions are approximate and can be adjusted by the user to achieve the desired consistency.

FILLING AND FAIRING MIXES

ADHESIVE MIXES